Journal of Advances in Science and Technology (JAST) Volume: 13 | Issue: 1 (Special Issue ) Archived Approved by UGC (till June 2019)
GENERAL INFORMATION
| License : Attribution 3.0 Unported (CC BY 3.0) | Start Year : Feb, 2011 |
| e-ISSN : 2230-9659 | Open Access : Yes |
| DOI : 10.29070/JAST | Volume Frequency : Bi-Annual |
| Peer Reviewed : Yes , Country : India | Special Edition : 3 |
| Indexing & Impact Factor UNIVERSITY GRANTS COMMISSION (UGC) : 8099 (2017) IIFS : 1.0 (2014) |
|
EDITOR-IN-CHIEF
Operations Head
Publications
Ignited Minds
India
CALL FOR PAPERS
Next Issue Date : Mar, 2024
Aim/ Scope
Journal of Advances in Science and Technology (JAST) is a scholarly online, open access, peer-reviewed, interdisciplinary, half yearly, and fully refereed journal focusing on theories, methods and applications in Science,Technology and relevant fields. It is an international scientific journal that aims to contribute to the constant scientific research and training, so as to promote research in the field of Science and Technology.The Journal welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence.
Design and Development of New Mulching Machine For Agriculture | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 1-8 (8)
Padawal N. T.* Mali R. D. Nandgavakar S. D. Suryavanshi Vishwas Ramdas Umesh P. Sutar Duradundi Sawant Badkar
Virtual Validation of Parabolic Leaf Spring Under the Static Load Condition By Using Fea | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 9-12 (4)
Sachin Patil*
Structural and Transient Thermal Analysis of Steam Turbine Rotor | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 13-18 (6)
Nikhil S. Jumde* Vivek V. Pande
Design and Development of Automated Capsicum Sorting System Using Plc | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 19-22 (4)
Sujeet A. Soundattikar* Deepak R. Salunkhe
Design of Crankshaft of Micro-Alloy Steel By Using Matlab For Fatigue Failure | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 23-30 (8)
Ranjeet Ghule* M. V. Kavade G. S. Uppar
Design and Development of an Attachment For a Drainage Cleaner | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 31-34 (4)
Ashlesha Junghare* Rituja Kulkarni Mrunal Dahake
Gating System and Feeder Design of Aluminium Alloy (Aa6063) Casting For Rectangular Component | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 35-40 (6)
Kiran R. Jathar* Anant V. Hankare Amol A. Sapkal
Review of Selection of Tungsten Inert Gas Welding Parameters For Stainless Steel | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 41-45 (5)
Gajanan M. Koli* Vijay S. Jadhav
Analysis of Heat Transfer Coefficient In Heat Pipe | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 46-49 (4)
A. D. Awasare* R. N. Panchal P. S. Jadhav
Thermodynamic Analysis of Transcritical Co2 Refrigeration System Used For Simultaneous Heating and Cooling Application | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 50-54 (5)
S. D. Patil Shelake* Madhu L. Kasturi S. H. Baber
Effect of L/D Ratio on Thermal Performance of Ranque-Hilsch Vortex Tube | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 55-60 (6)
Kiran D. Devade* Ashok T. Pise
Effect of Compression Ratio on Performance and Emissions of a Single Cylinder Four Stroke Diesel Engine | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 61-65 (5)
Yogesh S. Awate* Madhu L. Kasturi K. S. Gharge A. T. Pise
Reduction In Cold Start Emissions By Using Pcm Based Catalytic Converter | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 66-71 (6)
V. A. Chinchole* A. V. Waghmare
Experimental Investigation of the Effect of Compression Ratio on the Performance of a Vcr Cng Engine | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 72-77 (6)
Anand Ramachandran* Avinash Waghmare
Thermal Performance of Phase Change Material and Water In Microchannel For Cpu Processor Cooling | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 78-83 (6)
V. P. Gaikwad* S. P. More
Experimental Investigation of Effects of Angle of Inclination on Convective Heat Transfer Through Permeable Fins In Natural Convection | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 84-87 (4)
A. S. Pendse* S. U. Mayekar S. A. Pashte
Numerical Heat Transfer Analysis of Flowing Fluid Through a Circular Tube With Helical Twisted Strip Inserts | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 88-94 (7)
Sachin S. Surywanshi* Sanjay V. Kadam Suhas S. Mohite
Performance and Emission Improvement of Automobile Engine By Using Supercharging and Turbocharging: a Review | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 95-98 (4)
Vaibhav D. Kshirsagar* Vaibhav D. Tarapure Dhananjay Dolas
Emphasizing Utilization of Solar Cooking Alternatives: Approach With an Illustrative Case Study | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 99-103 (5)
H. L. Deshpande*
Comprehensive Study on Additives to Reduce Ash Related Issues In Biomass Combustion | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 104-107 (4)
Mohammed Junaid* N. V. Sali
Review of Bubble Behaviour In Pool Boiling By Single Bubble Dynamics | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 108-115 (8)
Dinesh S. Kawale* A. R. Acharya A. T. Pise
Review of Waste Heat Recovery from Exhaust Gas of Ic Engines | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 116-120 (5)
Patil Amol S.* Gharge K. S. Kawale Dinesh S.
Review of Nanofluid As Coolant In Automobile Radiator | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 121-126 (6)
A. V. Mane* N. V. Sali
Review of Heat Transfer Augmentation In a Tube Heat Exchanger Using Passive Methods | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 127-131 (5)
M. L. Kasturi* Junaid Mohammed A. R. Acharya
Review on Numerical Simulations of Heat Transfer of Single Bubble In Nucleate Pool Boiling | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 132-138 (7)
S. B. Khule* A. R. Acharya A. T. Pise
Experimental and Numerical Investigation of Conventional Micro-Channel For Electronic Cooling | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 139-145 (7)
Abhinandan Kumar* S. S. Mohite V. P. Gaikawad
Analysis of Plate Type Offset Fin Compact Heat Exchanger – a Review | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 146-151 (6)
Rishabh Melwanki* S. S. Umale
Investigation of Heat Transfer Enhancement In Air Cooled Computer Processor Heat Sink | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 152-157 (6)
A. S. Dabhole* S. M. Pise P. B. Mutalik
Experimental Investigation of Convective Heat Transfer By Permeable Fins at Different Angles of Inclination and Reynolds Numbers In Forced Convection | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 158-162 (5)
K. N. Rege* S. U. Mayekar V. S. Bagade
Effect of Electrolyte Solution on Various Parameters In Ecdm | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 163-167 (5)
S. J. Mulani* A. D. Awasare R. N. Panchal
Process Parameter Analysis of Plasma Arc Cutting For Surface Roughness and Material Removal Rate With the Help of Analysis of Variance Technique | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 168-174 (7)
Ashish P. Mahajan* Digvijay Patil N. H. Deshpande
Process Optimization For Milling Operation - a Review | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 175-180 (6)
A. B. Jamdar* S. S. Patil
Comparative Study of Mechanical Properties of Different Adhesives on Timber Bamboo | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 181-185 (5)
Shubhangi M. Gondane P. N. Belkhode Manisha Joshi
Development of Honeycomb Sandwich Structure For Aeronautical Flooring Components | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 186-192 (7)
S. B. Akiwate* V. D. Shinde
Value Stream Mapping In Manufacturing Industry: a Review | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 193-198 (6)
Deveshkumar S. Pandey* B. E. Narkhede
Delamination Detection In Composite Sandwich Beam: Experimental Study | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 199-204 (6)
Ranjeet A. Patil M. V. Kavade
Design and Manufacturing of Brazed Joint to Study the Effect of Varying Joint Clearance on Joint Quality | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 205-208 (4)
P. S. Mulik A. Bose* P. M. Khodke G. V. Kane
Effect of Heat Treatment Parameters and Alloying Elements on Microstructure of Austempered Ductile Iron – a Review | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 209-214 (6)
Sagar A. Patil* Sanket S. Vathare
Aeroplane Fuselage Design Modification to Overcome Pressure Drag Resistance | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 215-218 (4)
S. A. Kalugade* Sangram Pawar Suraj Chavan
Analysis of Surface Roughness During Turning of Aisi D2 Steel | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 219-226 (8)
Prafulla B. Pawar* Uday A. Dabade
Case Study on Improvement In Plant Layout Design | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 227-233 (7)
Devashri D. Thakre* Uday A. Dabade
Study on the Effect of Austempering Temperature and Time on the Corrosion Resistance of Carbidic Austempered Ductile Iron (Cadi) Material | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 234-240 (7)
Sanket P. Mahadik* Madhavi S. Harne Vijaykumar B. Raka
Automatic Mulch Paper Laying Machine For Agricultural Application | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 241-244 (4)
S. S. Magdum* S. B. Patil L. B. Mulla
Continuous Improvement of Automobile Engine Assembly Line: a Review and Case Study | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 245-252 (8)
Amol B. Sonawane* Uday A. Dabade
Additive Manufacturing of Metals: a Review | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 253-258 (6)
Sandesh S. Narkhade* M. G. Rathi
Tribological Behaviour of Ptfe and Its Composites | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 259-266 (8)
Vaibhav V. Nemane* A. G. Bhuibhar S. A. Sonwane V. B. Raka
Wear Analysis of Aluminium - Zinc Alloys Under Dry Lubrication | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 267-272 (6)
Gaurav L. Deshpande* S. A. Sonawane K. V. Nemade
Effects of Cutting Parameters on Cutting Force, Surface Roughness and Mrr In Hard Turning of Aisi 4140 Alloy Steel | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 273-280 (8)
Shyam G. Rathod* S. S. Mohite
Tool Condition Monitoring While Hard Turning En19 Alloy Steel Using Coated Carbide Insert | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 281-286 (6)
Rohit Wale* Suhas Mohite Manisha Yadav
Splintering Portrayal of Strung Rebar and Coupler | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 287-291 (5)
Vishal G. Salunkhe* Bhushan S. Walunj Amol K. Ingle
Brain Tumour Detection Using Self Organising Maps | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 292-296 (5)
Pooja Yadav* Y. M. Patil
Role of Information Technology and Inventory Management Tools In Supply Chain Management | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 297-301 (5)
Apurva Pawar* B. E. Narkhede V. V. S. S. Rao
Procurement Journey: from Shopfloor to Boardroom | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 302-311 (10)
C. N. Deshpande* Amey Phadke
Feature Level Fusion Approach In Multimodal Biometric System Design | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 312-317 (6)
Mahananda D. Malkauthekar*
Numerical Modeling and Analytical Verification For Evaluating Performance of Rf- Microelectromechanical Switches | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 318-324 (7)
V. B. Sawant* Ramesh More S. S. Mohite
Big Data Analysis Solutions: a Review | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 325-328 (4)
Priyanka P. Shinde*
A Comparative Study of Traditional Server and Azure Server | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 329-331 (0)
K. G. Kharade* V. S. Kumbhar S. K. Kharade
Design and Fabrication of Reverse Gear System For Handicapped Person Vehicle | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 332-336 (5)
Kazi Samir P.* Diwan Altmansh I. Kolekar Amol V.
Friction Stir Welding: a Review | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 337-342 (6)
Ganesh Y. Surve* Vijay S. Jadhav
Electrical Power Generation Using Bicycle Generator | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 343-347 (5)
Joya Shaikh* Paresh Salvi Namdeo Patil
Exploring the Critical Success Factors For Project Management and Project Risk Management | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 348-352 (5)
Rahul Dandage* S. S. Mantha S. B. Rane
Review on Different Techniques to Reduce and Detect Knock and Misfire | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 353-355 (3)
Avinash M. Patil* Mahesh V. Mane Nikhil S. Mane
Heat Transfer Characteristics of Nanofluids In Helical Coiled Tube Teat Exchanger: a Review | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 356-361 (6)
Abhishek R. Sonawane* N. V. Sali Akshaykumar Mane
Review on Modification In Geometry of Regenerative Pump | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 362-369 (8)
Rohit S. Kanase* Ashok T. Pise Pravin C. Garje
Design and Fabrication of Single Cylinder Six Stroke Engine Over Single Cylinder Four Stroke Engine | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 370-373 (4)
Gavit Sandip G.* Patil Megha A. Lokhande Pooja S. Asst. Prof. Sali N. V.
Recent Trends In Alternative Fuels – (A Review) | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 374-378 (5)
Rasika Kulkarni* Sudhakar S. Umale
Experimental Investigation and Optimization of Micro-Wire Edm Parameters In Machining of Inconel 718 | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 379-383 (5)
Deepak Rajendra Unune* Prabhav Bhavsar
Process Optimization of Wire Electrical Discharge Machining - a Review | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 384-389 (6)
P. M. Tambe* P. L. Jadhav
Effect of Dielectric Fluid In Edm: a Review | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 390-394 (5)
Snehal C. Sapkale* Uday A. Dabade
Computer Aided Process Planning (Capp) For Production Process-A Review | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 395-399 (5)
Vrushali T. Pawar* Maruti S. Pawar
Review on Optimization of Submerged Arc Welding Process | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 400-404 (5)
Vishal R. Jathade* Prakash M. Khodke
Effect of Diamond Burnishing Process on Surface Roughness of Aisi 4140 Alloy Steel | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 405-410 (6)
Anant V. Hankare* Amol A. Sapkal Ashutosh A. Dounde
Effect of Process Parameters on Quality of Seam Welded Aisi 304L | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 411-415 (5)
Gajanan Gaikwad* Kedar Inamdar
Study of Weld Joints Qualification As Per Asme Code: Scrf Cavity, a Case Study | Original Article
Volume: 13/ Issue: 1 , 10 Mar 2017, Pages: 416-420 (5)
Bhushan Y. Dharmik Syed Moulali P. M. Khodke A. M. Puntambekar
2023
2022
| Vol. 19, IssueNo. 1, March, 2022 |
| Vol. 19, IssueNo. 2, April, 2022 (Special Issue ) |
| Vol. 19, IssueNo. 3, September, 2022 |
2021
2020
2019
2018
2017
| Vol. 13, IssueNo. 1, March, 2017 (Special Issue ) |
| Vol. 14, IssueNo. 1, June, 2017 |
| Vol. 14, IssueNo. 2, September, 2017 |
| Vol. 13, IssueNo. 2, March, 2017 |
2016
| Vol. 10, IssueNo. 21, February, 2016 |
| Vol. 11, IssueNo. 22, May, 2016 |
| Vol. 11, IssueNo. 23, August, 2016 |
| Vol. 12, IssueNo. 24, November, 2016 |
| Vol. 12, IssueNo. 25, December, 2016 (Special Issue ) |
2015
| Vol. 8, IssueNo. 16, February, 2015 |
| Vol. 9, IssueNo. 19, May, 2015 |
| Vol. 10, IssueNo. 20, November, 2015 |
2014
| Vol. 6, IssueNo. 12, February, 2014 |
| Vol. 7, IssueNo. 13, May, 2014 |
| Vol. 7, IssueNo. 14, August, 2014 |
| Vol. 8, IssueNo. 15, November, 2014 |
2013
| Vol. 4, IssueNo. 8, February, 2013 |
| Vol. 5, IssueNo. 9, May, 2013 |
| Vol. 5, IssueNo. 10, August, 2013 |
| Vol. 6, IssueNo. 11, November, 2013 |
2012
| Vol. 3, IssueNo. 4, February, 2012 |
| Vol. 3, IssueNo. 5, May, 2012 |
| Vol. 3, IssueNo. 6, August, 2012 |
| Vol. 4, IssueNo. 7, November, 2012 |
2011
| Vol. 1, IssueNo. 1, February, 2011 |
| Vol. 2, IssueNo. 1, August, 2011 |
| Vol. 2, IssueNo. 2, November, 2011 |
