Implementation 64- Point FFT Using CORDIC Algorithm | Original Article
This electronic document describes the method of implementation of Fast Fourier transform processor: FFT using mixed CORDIC and radix algorithm. The basic result analyzed using this method is power consumption and area. CORDIC is basically DSP application but here it is used for twiddle factor multiplication. Radix 2^5 fft algorithm is used for reduction of complex multiplication. The proposed calculation minimizes the quantity of multipliers. Outline illustrations demonstrate that the FFT planned by the proposed system displays a lower equipment with more quality than existing techniques. At first FFT usefulness is checked utilizing MATLAB lastly re-enacted and integrated utilizing Xilinx ISE 14.1.Besides CORDIC calculation is executed in both MATLAB and in Xilinx on Virtex-5. The fundamental goal of this work is to get a territory proficient FFT and CORDIC without execution misfortune that could be utilized as a piece of Signal preparing.