Necessity of Effective Quality Control System for Bridge Construction (A Review)

Authors

  • Mr. Anil Barge PG Student. Dept of Civil Engg. PVPIT, Pune, Maharashtra
  • Prof. Avdhooth Kadu Professor, Dept of Civil Engg, PVPIT, Pune, Maharashtra

DOI:

https://doi.org/10.29070/ept4m659

Keywords:

Construction Industry, Quality Control System, Checklist, Bridge

Abstract

As urbanization quickens and transportation systems proceed to advance, bridges, as indispensably components of urban foundation, confront progressively impressive challenges in their plan and development administration. This inquire about investigates the integration of naturally inviting, financially productive, and socially satisfactory plan standards and development administration strategies in bridge designing from the viewpoint of economical advancement. Through case investigations and information measurements, this paper presents optimized bridge plan arrangements beneath different natural conditions and examines techniques to play down asset squander and improve development effectiveness, in this way accomplishing the feasible improvement objectives of bridge building The quality parameters should easy to understand specially checklists should be easy to understand and easy for implementation In this study is carried out to analyze the scenario of Quality Control System application, to identify factors affecting the construction organization and to issue recommendations on how to improve the implementation of Quality Control System in Construction Industry. The growth in infrastructure increases in our country which leads the construction of new bridges is one most the key elements in this Initially the checklists are observed from different site the defects will identify in check lists and suggest new checklists for each items of construction. This paper finds Necessity of Effective Quality Control System for Bridge Construction by analysising the different Literature review

References

Ahmad Huzaimi Abd Jamila,b,, Mohamad Syazli Fathia (2016),” The Integration of Lean Construction and Sustainable Construction: A Stakeholder Perspective in Analyzing Sustainable Lean Construction Strategies in Malaysia” Science Direct 100 ( 2016 ) 634 – 643

Ahmed S. Agha (2016).” Total Quality Management In Construction Industry”. International Journal of Scientific & Engineering Research, Volume 7, Issue 4, April-2016

M.S. Abd-Elwahed & M.A. El-Baz (2018).” Impact of Implementation of Total Quality Management an Assessment of Saudi Industry” South African Journal of Industrial Engineering May 2018 Vol 29(1), pp 97-107

Maha Alkasisbeh (2018).” Implementation of Six Sigma Tools in Building Construction”, Proceedings of the International Conference on Industrial Engineering and Operations Management Paris, France, July 26-27, 2018

Sarathkumar K, Loganathan R (2016)” Evaluation of Six Sigma Concepts in Construction Industry”, International Journal of Scientific & Engineering Research, Volume 7, Issue 4, April-2016

Savita Sangle M.C. Aher, R.V. Devalkar (2017) Total quality Management in Construction Industry” International Journal of Technical Research and Applications e-ISSN: 2320-8163, www.ijtra.com Volume 5, Issue 3 (May-June 2017), PP. 111-115

Sneha P. Sawant, Smita V. Pataskar (2014),” Applying Six Sigma Principles in Construction Industry for Quality Improvement” Advances In Engineering And Technology - ICAET-2014 Copyright © Institute of Research Engineers and Doctors.

Tapan Vora, 2014, Journey from six sigma to Lean Six Sigma, International journal of Modern engineering research, Vol 4, Issue 2.

Hamad M.A, 2014, How to reduce waste on industries by using Lean sigma tool, International journal of Scientific Engineering research, Vol 5, Issue 8, pp 442-445.

Elliot Boldt, 2013, Total Sustainability assessments for Manufacturing operations through Six Sigma, Science Journal of Environmental Engineering Research, Vol . 2013 pp: 1-6

Mamatha K, 2014, Application of Six sigma methodology to reduce rework at earth moving Equipment, International journal of Engineering science and Technology, Vol.6, pp: 417-422.

Prabir K B, 2011,Using Six Sigma in Adopting Business excellence Model, International Journal of Business and Management, Vol .6 pp : 273-277.

Uddin S.M, 2014, Minimization of defects in sewing section of Garment factory through DMAIC, Research Journal of Engineering sciences, Vol .3 , pp: 22-25.

Ibrahim H E, 2014, Implementation of Lean six Sigma in a Pharmaceutical Industry, International journal of scientific and Engineering Research, Vol .5, pp 519-529.

Mayank Bundele. 2014, Sustainable quality of safety in safety management with six Sigma, International journal of scientific and Engineering Research, Vol .7, pp 539-545.

Satish Kumar, 2014, Impact of Six sigma DMAIC approach on Manufacturing industries, International journal of Research in Engineering and technology. Vol : 3 page 12652-12658.

Surendraj Dharmapal. 2014, Integrating Six Sigma Tools on agile Methodology, International journal of Advanced Research in Software Engineering . Vol 4, pp 295-300.

Anup A J, 2014, Six Sigma technique for Quality improvement in Valve Industry, International journal of Advanced Research in Engineering, Vol 2, pp 1-6.

Ivan Sunit R, 2014, Implementation of six sigma Using DMAIC Methodology in small scale Industries. International journal of Modern Engineering Research. Vol. 4, pp 44-49.

Pepper, M., 2010, “The evolution of Six Sigma”, International Journal of Quality, Vol.2, pp.138-155.

Downloads

Published

2024-09-03

How to Cite

[1]
“Necessity of Effective Quality Control System for Bridge Construction (A Review)”, JASRAE, vol. 21, no. 3, pp. 83–87, Sep. 2024, doi: 10.29070/ept4m659.

How to Cite

[1]
“Necessity of Effective Quality Control System for Bridge Construction (A Review)”, JASRAE, vol. 21, no. 3, pp. 83–87, Sep. 2024, doi: 10.29070/ept4m659.