Role of Virtual Surgical Planning in Pan Facial Trauma Reconstruction
DOI:
https://doi.org/10.29070/29ydpp97Keywords:
Virtual, surgical, craniomaxillofacial, complexAbstract
With the aim of enhancing speed and accuracy for intricate surgical procedures, craniomaxillofacial surgeons have just begun using virtual surgical planning (VSP). Among its several uses, VSP has the potential to cure orbital fractures and other craniofacial abnormalities that might be either present at birth or developed over time. By illuminating the interplay between bone and neurovascular components, VSP helps the surgeon make sense of the craniofacial region's intricate anatomy. In this particular example, the patient suffered from pan facial trauma and had several facial bone fractures. In order to prepare for the operation, the surgeon used an AM medical model to customize the micro plates. In order to improve the results of complicated procedures, this article also discusses the significance of AM medical models.
References
Bou Zeid, Naji & Scharf, Isabel & Nahass, George & Yang, Kevin & Purnell, Chad & Alkureishi, Lee. (2024). Secondary Reconstruction of Panfacial Fractures With Virtual Reality Surgical Planning Using Both Pre and Postreconstruction Scans. The Journal of craniofacial surgery. 10.1097/SCS.0000000000010780.
Guo Y, Lopez J, Yang R, Macmillan A, Dorafshar AH. The Use of Virtual Surgical Planning in Total Facial Skeletal Reconstruction of Treacher Collins Syndrome: A Case Report. Craniomaxillofacial Trauma & Reconstruction. 2018;11(3):230-237. doi:10.1055/s-0037-1604424
Velarde, K., Cafino, R., Isla, A., Ty, K. M., Palmer, X. L., Potter, L., … Velasco, L. C. (2023). Virtual surgical planning in craniomaxillofacial surgery: a structured review. Computer Assisted Surgery, 28(1). https://doi.org/10.1080/24699322.2023.2271160
Zoabi, A., Redenski, I., Oren, D., Kasem, A., Zigron, A., Daoud, S., Moskovich, L., Kablan, F., & Srouji, S. (2022). 3D Printing and Virtual Surgical Planning in Oral and Maxillofacial Surgery. Journal of clinical medicine, 11(9), 2385. https://doi.org/10.3390/jcm11092385
Sharaf, B. A., Morris, J. M., & Kuruoglu, D. (2021). EPPOCRATIS: A Point-of-Care Utilization of Virtual Surgical Planning and Three-Dimensional Printing for the Management of Acute Craniomaxillofacial Trauma. Journal of clinical medicine, 10(23), 5640. https://doi.org/10.3390/jcm10235640
Grimm T (2004) User’s guide to rapid prototyping.Michigan: Society of manufacturing Engineers (1 Edn) 10. Standard Terminology for Additive Manufacturing Technologies (2012), ASTM International.
Manmadhachary A, Kumar RY, Krishnan L (2016) Finding of Correction Factor and Dimensional Error in Bio-AM Model by FDM Technique. Journal of Institute of Engineers India Series C pp: 1-8.
Malyala SK, Kumar RY (2016) Optimizing 128 Slice Spiral CT Scanner Parameters to Minimize Acquisition Errors. International Journal of Mechanical Engineering and Information Technology 4: 1642-1648.
Malyala SK, Kumar RY (2016) A Review on Rapid Prototyping Technologies in Biomedical Applications. Int J Recent Sci Res 7: 10783-10789.
Anderl H, ZurNedden D, Műhlbauer W, Twerdy K, Zanon E, et al. (1994) CT guided stereolithography as a new tool in craniofacial surgery. Br J PlastSurg 47: 60-64.
Bill JS, Reuther JF, Dittmann W, Kübler N, Meier JL, et al. (1995) Stereolithography in oral and maxillofacial operation planning. Int J Oral Maxillofac Sur 24: 98-103.
Schubert C, van Langeveld MC, Donoso LA (2014) Innovations in 3D printing: a 3D overview from optics to organs. Br J Ophthalmol 98: 159-161.
Banks J (2013) Adding value in additive manufacturing: Researchers in the United Kingdom and Europe look to 3D printing for customization. IEEE Pulse. 4: 22-26.
Mertz L (2013) Dream it, design it, print it in 3-D: What can 3D printing do for you? IEEE Pulse 4: 15-21.
Ursan I, Chiu L, Pierce A (2013) Three-dimensional drug printing: a structured review. J Am Pharm Assoc 53: 136-144.
This work is licensed under a 