Traffic Accident System Analysis: Optimization and Interpretation of traffic using Pattern Search Recognition Case Studies
DOI:
https://doi.org/10.29070/934f2j63Keywords:
Traffic, Pattern Search, Resource Productivity, Planning, Material Management, Cost, AccidentAbstract
Traffic management and control utilising roadside controllers and intelligent cars is aninnovative method for designing a roadway. In order to improve highway safety, efficiency, and many otheraspects for vehicles and users alike, the Intelligent Transportation Highway System (ITHS) is a new designidea. Improved highway design has been made possible by this notion, as well as a reduction in theenvironmental impact of automobiles on the roadways.This analysis is essential from a global business perspective as well as a project one. As a result oftoday's worldwide economic environment, any firm must compete against other businesses from acrossthe world. In a circumstance like this, maximising the use of resources in accordance with a pre-plannedtimetable is absolutely essential. A method for evaluating resource productivity within the constraints ofthe project must be in place before this can be done. The primary goal of this project is to investigate theresources needed for highway building and to boost Resource Productivity under various conditions.For any team or group to accurately forecast their output rate and that of the entire project team, it isimperative that the productivity of the resources used in highway projects be thoroughly studied andanalysed. To make the planning process move more smoothly, it is necessary to identify the elementsthat influence the productivity of each resource and to create graphs, formulae, and charts that estimateproduction.Downloads
References
K. Swarna Kumari, J. Vikrant, Dr. Om Prakash, “A study on resource planning in highway construction projects”, International Journal of engineering research and applications (IJERA), VOL. 2 ISSUE 4, pp. 1960- 1966, August 2012
K. Sri Bindu, U. Jaya Santosh Kumar, “Resource optimization in road construction projects”, International journal of engineering development and research (IJEDR), Volume-4, ISSUE 2, pp. 1580- 1584., 2016
Vishnuraj R.G., Vishak M. S, “Optimization of Resources in Highway Construction”, International journal of engineering and management research(IJEMR), Volume 7, Issue-2, Page number 106-110, March-April 2017
Pankaj Suresh, Rayamane, Amey A. Kelkar, “Productivity Escalation and Cost Optimisation of Equipment’s used in Pavement Construction” International research journal of engineering and technology (IRJET), Volume-4, Issue-9, Page Number 291-302, September 2017
Wisoot Jiradamkerng, “A productivity management of road construction in Thailand”, Engineering Journal VOL. 20 ISSUE 3, pp. 183- 195, August 2016.
Shadab Alam, Dr. Om Prakash Netula, “Study And Analysis Of Process And Material Used In Highways Construction”, IJATTMAS Vol. 2 Issue 7, pp 8-15, August 2016
S. W. Nunnally, “Construction Methods and Management”, Pearson Prentice Hall, Upper Saddle River, New Jersey Columbus, Ohio, 2007.
Hussanein, Osama Moselhi “Planning and scheduling highway construction”, Journal of construction engineering and management, 130 (5), October 2004
David NgwokeMbazor Sunday OkuomaOkoh,’ Productivity Improvement in Construction Project Delivery’, Civil and Environmental Research, Vol.7, No.10, pp. 31-34, 2015.
FarnadNasirzadeh and PouyaNojedehi, ‘Dynamic modeling of labor productivity in construction projects’, International Journal of Project Management, Vol.31, pp. 903–911, 2013.
Frank D.K. Fugar and Adwoa B. Agyakwah-Baah,’ Delays in Building Construction Projects in Ghana’, Australasian Journal of Construction Economics and Building, Vol.10 (1/2), pp. 103‐116, 2010.
ParvizGhoddousi and Mohammad Reza Hosseini, ‘a survey of the factors affecting the productivity of construction projects in Iran’, Journal of Technological and economic development of economy’, Volume 18(1), pp. 99–116, 2012.
SerdarDurdyev and Jasper Mbachu, ‘on-site Labour Productivity of New Zealand site Labour Productivity of New Zealand construction industry’, Australasian Journal of Construction Economics and Building, Vol. 11 (3), pp.18-33, 2011.
Panas, A., Pantouvakis, J. P. Evaluating Research Methodology in Construction Productivity Studies. The Built & Human Environment Review. 3(1), 2010, pp. 63-85.
Rashidi, A., RashidiNejad, H., Maghiar, M. Productivity Estimation of Bulldozers using Generalized Linear Mixed Models. Journal of Civil Engineering. 18(6), 2014, pp. 1580- 1589.
Montaser, A., Bakry, I., Alshibani, A., Moselhi O. Estimating productivity of earthmoving operations using spatial technologies. Canadian Journal of Civil Engineering. 39(9), 2012,pp. 1072-1082
Montaser, A., Moselhi, O. Truck for earthmoving operations. Journal of Information Technology in Construction. 19, 2014, pp. 412-433.
Schabowicz, K., Hoła, B. Application of artifcial neural networksin predicting earthmoving machinery effectiveness ratios. Archives of Civil and Mechanical Engineering. 8 (4), 2008,pp. 73-84
Abulizi, N., Akiri Kawamura, Kazuya Tomiyama, and Shun Fujita. 2016. “Measuring and evaluating of road roughness conditions with a compact road profiler and ArcGIS.” Journal of Traffic and Transportation Engineering, 3(5): 398-411.
D'Apuzzo, Mauro, and Vittorio Nicolosi. 2010. “A New Methodology for Stochastic Modelling of Pay Factors in Hot-Mix Asphalt Pavements.” Road Materials and Pavement Design, 11: 559-585.
Amekudzi-Kennedy, Adjo, Samuel Labi and Prerna Singh. 2019. “Transportation Asset Valuation: Pre-, Peri- and Post Fourth Industrial Revolution.” Transportation Research Record: Journal of the Transportation Research Board, 2673(12): 163-172.
An Alternative Method for Traffic Accident Severity Prediction: Using Deep Forests Algorithm Jing Gan , Linheng Li , Dapeng Zhang , Ziwei Yi , and Qiaojun Xiang, Journal of Advanced Transportation, 21 December 2020
A traffic pattern detection algorithm based on multimodal sensing Yanjun Qin, HaiyongLuo, Fang Zhao, Zhongliang Zhao and Mengling Jiang, Advances in Data Fusion of Multi-Sensor Architecture: Algorithm and Applications - Research Article2018
Road accident prediction and model interpretation using a hybrid K means and random forest algorithm approach Salahadin Seid Yassin, Pooja, Research Article, and Springer 28 August 2020
Data-Driven Urban Traffic Accident Analysis and Prediction Using Logit and Machine Learning-Based Pattern Recognition Models VahidNajafiMoghaddamGilani , Seyed Mohsen Hosseinian, Mathematical Problems in Engineering, Research Article, 27 May 2021
Modern data sources and techniques for analysis and forecast of road accidents: A review Camilo Gutierrez-Osorio, Cesar Pedraza, Journal of Traffic & Transportation Engineering, Science Direct 7 July 2020
Predicting injury severity and crash frequency: Insights into the impacts of geometric variables on downgrade crashes in Wyoming MilhanMoomen, Mahdi Rezapour, Mustaffa N. Raja, KhaledKsaibati, Journal of Traffic & Transportation Engineering, Science Direct 25 October 2019
Evaluation of calcined textile sludge as a stabilizing material for highway soil Alice Gonzaga de Oliveira, Amanda Diniz Barros, Leda Christiane de Figueiredo Lopes Lucena, Journal of Traffic & Transportation Engineering, Science Direct 26 March 2020
Use of regression trees to predict overweight trucks from historical weigh-in-motion data Mariana Bosso, Kamilla L. Vasconcelos, Linda Lee Ho, Liedi L.B. Bernucci, Journal of Traffic & Transportation Engineering, and Science Direct 15 September 2019
State of the art and computational aspects of time-dependent waiting models for non-signalised intersections Raffaele Mauro, Andrea Pompigna, Journal of Traffic & Transportation Engineering, Science Direct, 18 May 2020
Integrating Accident and Travel Delay Externalities in an Urban Speed Reduction Context David A. Hensher, Transport Reviews: A Transnational Trans-disciplinary Journal, November 2014
Experimental analysis of operational data for roundabouts through advanced image processing Marco Bassani, Lorenzo Mussone, Journal of Traffic & Transportation Engineering, & Science Direct 26 September 2019
Investigation of accuracy of pavement mechanistic empirical prediction performance by incorporating Level 1 inputs MdMehediHasan, A.S.M. AsifurRahman, Rafiqul A. Tarefder, Journal of Traffic & Transportation Engineering, & Science Direct 18 May 2019
Maximising accuracy and efficiency of traffic accident prediction combining information mining with computational intelligence approaches and decision trees Tatiana Tambouratzis, Dora Souliou, Miltiadis Chalikias3 and Andreas Gregoriades, JAISCR 2014
Intelligent Transportation and Control Systems Using Data Mining and Machine Learning Techniques: A Comprehensive Study NAWAF O. ALSREHIN, AHMAD F. KLAIB, AND AWS MAGABLEH, IEEE April 25, 2019
Analysis of Road Traffic Accident using Causation Theory with Traffic Safety Model and Measures Dr. Neeta Saxena, International Journal for Research in Applied Science & Engineering Technology (IJRASET), August 2017
The role of artificial intelligence in achieving the Sustainable Development Goals, Ricardo Vinuesa, HosseinAzizpour, IolandaLeite, Madeline Balaam, Virginia Dignum, Sami Domisch, 2020
Convolutional neural networks: an overview and application in radiology Rikiya Yamashita1,2 & Mizuho Nishio1,3 & Richard KinhGian Do, Springer 22 June 2018
Critical analysis of Big Data challenges and analytical methods UthayasankarSivarajah, Muhammad Mustafa Kamal, ZahirIrani, VishanthWeerakkody, Journal of Business Research, Science Direct 2019
Analyzing traffic patterns on street segments based on GPS data using R EmilianNecula, Transportation Research Procedia, Science Direct 2017
