Vol. 13 No. 1 (2017): Journal of Advances in Science and Technology (JAST) | Journal of Advances in Science and Technology

Aeroplane Fuselage Design Modification to Overcome Pressure Drag Resistance
Reducing Drag Force and Power Consumption in Aeroplane Fuselage Design

1. S. A. Kalugade

2. Sangram Pawar

3. Suraj Chavan

215-218

PDF HTML

Analysis of Surface Roughness during Turning of AISI D2 Steel
Optimization of Cutting Parameters in Turning of AISI D2 Steel

1. Prafulla B. Pawar

2. Uday A. Dabade

219-226

PDF HTML

Case Study on Improvement in Plant Layout Design
A Case Study on Systematic Layout Planning for Plant Layout Design and Cost Reduction

1. Devashri D. Thakre

2. Uday A. Dabade

227-233

PDF HTML

Study on the Effect of Austempering Temperature and Time on the Corrosion Resistance of Carbidic Austempered Ductile Iron (CADI) Material
Investigation of corrosion resistance and hardness of carbidic austempered ductile iron

1. Sanket P. Mahadik

2. Madhavi S. Harne

3. Vijaykumar B. Raka

234-240

PDF HTML

Automatic Mulch Paper Laying Machine for Agricultural Application
Improving Efficiency in Agricultural Mulching

1. S. S. Magdum

2. S. B. Patil

3. L. B. Mulla

241-244

PDF HTML

Continuous Improvement of Automobile Engine Assembly Line: A Review and Case Study
Examining the Role of Continuous Improvement in Enhancing Quality and Productivity in the Automobile Manufacturing Industry

1. Amol B. Sonawane

2. Uday A. Dabade

245-252

PDF HTML

Additive Manufacturing of Metals: A Review
-

1. Sandesh S. Narkhade

2. M. G. Rathi

253-258

PDF HTML

Tribological Behaviour of PTFE and its Composites
Investigation on the Effects of Applied Load, Sliding Time, and Sliding Velocity on the Tribological Behavior of PTFE and its Composites

1. Vaibhav V. Nemane

2. A. G. Bhuibhar

3. S. A. Sonwane

4. V. B. Raka

259-266

PDF HTML

Wear Analysis of Aluminium - Zinc Alloys under Dry Lubrication
Effect of Applied Load, Sliding Time, and Sliding Velocity on Wear and Frictional Behavior of Aluminium-Zinc Alloys under Dry Lubrication

1. Gaurav L. Deshpande

2. S. A. Sonawane

3. K. V. Nemade

267-272

PDF HTML

Effects of Cutting Parameters on Cutting Force, Surface Roughness and MRR in Hard Turning of AISI 4140 Alloy Steel
Effects of Cutting Parameters on Cutting Force, Surface Roughness, and MRR in Hard Turning of AISI 4140 Alloy Steel: A Taguchi Method Approach

1. Shyam G. Rathod

2. S. S. Mohite

273-280

PDF HTML

Tool Condition Monitoring While Hard Turning EN19 Alloy Steel Using Coated Carbide Insert
Investigation of Tool Condition and Cutting Forces in Hard Turning EN19 Alloy Steel

1. Rohit Wale

2. Suhas Mohite

3. Manisha Yadav

281-286

PDF HTML

Splintering Portrayal of Strung Rebar and Coupler
Enhancing Reinforcement Efficiency through Mechanical Couplers

1. Vishal G. Salunkhe

2. Bhushan S. Walunj

3. Amol K. Ingle

287-291

PDF HTML

Brain Tumour Detection Using Self Organising Maps
A Machine Learning Approach for Early Brain Tumour Detection

1. Pooja Yadav

2. Y. M. Patil

292-296

PDF HTML

Role of Information Technology and Inventory Management Tools in Supply Chain Management
Optimizing Supply Chains with Information Technology and Inventory Management Tools

1. Apurva Pawar

2. B. E. Narkhede

3. V. V. S. S. Rao

297-301

PDF HTML

Procurement Journey: From Shopfloor to Boardroom
The Evolution of Procurement and its Impact on the Supply Chain

1. C. N. Deshpande

2. Amey Phadke

302-311

PDF HTML

Feature Level Fusion Approach in Multimodal Biometric System Design
A Comparative Analysis of Feature Fusion Techniques in Multimodal Biometric Systems

1. Mahananda D. Malkauthekar

312-317

PDF HTML

Numerical Modeling and Analytical Verification for Evaluating Performance of RF- Microelectromechanical Switches
Analyzing the Performance of RF-MEMS Switches through Numerical Modeling and Analytical Verification

1. V. B. Sawant

2. Ramesh More

3. S. S. Mohite

318-324

PDF HTML

Big Data Analysis Solutions: A Review
Exploring Challenges and Advancements in Big Data Visualization

1. Priyanka P. Shinde

325-328

PDF HTML

A Comparative Study of Traditional Server and Azure Server
Exploring the Benefits and Features of Microsoft Windows Azure

1. K. G. Kharade

2. V. S. Kumbhar

3. S. K. Kharade

329-331

PDF HTML

Design and Fabrication of Reverse Gear System for Handicapped Person Vehicle
Enhancing Mobility for Physically Challenged Individuals: Design and Fabrication of a Reverse Gear System for Handicapped Person Vehicle

1. Kazi Samir P.

2. Diwan Altmansh I.

3. Kolekar Amol V.

332-336

PDF HTML

Friction Stir Welding: A Review
Advancements and Applications

1. Ganesh Y. Surve

2. Vijay S. Jadhav

337-342

PDF HTML

Electrical Power Generation Using Bicycle Generator
Harnessing Human Energy for Sustainable Power Generation

1. Joya Shaikh

2. Paresh Salvi

3. Namdeo Patil

343-347

PDF HTML

Exploring the Critical Success Factors for Project Management and Project Risk Management
Exploring the factors for successful project management and risk management

1. Rahul Dandage

2. S. S. Mantha

3. S. B. Rane

348-352

PDF HTML

Review on Different Techniques to Reduce and Detect Knock and Misfire
Techniques for Enhancing IC Engine Performance and Reducing Emissions

1. Avinash M. Patil

2. Mahesh V. Mane

3. Nikhil S. Mane

353-355

PDF HTML

Heat Transfer Characteristics of Nanofluids in Helical Coiled Tube Teat Exchanger: A Review
A comprehensive review of heat transfer and flow characteristics in helical coiled tube heat exchangers using nanofluids

1. Abhishek R. Sonawane

2. N. V. Sali

3. Akshaykumar Mane

356-361

PDF HTML

Review on Modification in Geometry of Regenerative Pump
A Comprehensive Review of Geometrical Modifications in Regenerative Pumps

1. Rohit S. Kanase

2. Ashok T. Pise

3. Pravin C. Garje

362-369

PDF HTML

Design and Fabrication of Single Cylinder Six Stroke Engine over Single Cylinder Four Stroke Engine
Improving Engine Efficiency for Reduced Fuel Consumption and Air Pollution

1. Gavit Sandip G.

2. Patil Megha A.

3. Lokhande Pooja S.

4. Asst. Prof. Sali N. V.

370-373

PDF HTML

Recent Trends in Alternative Fuels – (A Review)
The Impact of Alternative Fuels on Engine Emissions

1. Rasika Kulkarni

2. Sudhakar S. Umale

374-378

PDF HTML

Experimental Investigation and Optimization of Micro-Wire EDM Parameters in Machining of Inconel 718
Investigating and Optimizing Micro-Wire EDM Parameters for Inconel 718 Machining

1. Deepak Rajendra Unune

2. Prabhav Bhavsar

379-383

PDF HTML

Process Optimization of Wire Electrical Discharge Machining - A Review
Optimizing machine parameters for Wire Electrical Discharge Machining

1. P. M. Tambe

2. P. L. Jadhav

384-389

PDF HTML

Effect of Dielectric Fluid in EDM: A Review
Exploring the Effects of Dielectric Fluid on EDM

1. Snehal C. Sapkale

2. Uday A. Dabade

390-394

PDF HTML

Computer Aided Process Planning (CAPP) for Production Process-A Review
Advancements and Challenges in Computer Aided Process Planning

1. Vrushali T. Pawar

2. Maruti S. Pawar

395-399

PDF HTML

Review on Optimization of Submerged Arc Welding Process
Impact of Welding Parameters on the Quality of Submerged Arc Welding

1. Vishal R. Jathade

2. Prakash M. Khodke

400-404

PDF HTML

Effect of Diamond Burnishing Process on Surface Roughness of AISI 4140 Alloy Steel
Optimizing Surface Finish through Diamond Burnishing Process

1. Anant V. Hankare

2. Amol A. Sapkal

3. Ashutosh A. Dounde

405-410

PDF HTML

Effect of Process Parameters on Quality of Seam Welded AISI 304L
Optimization of Seam Welding Parameters for AISI 304L Stainless Steel

1. Gajanan Gaikwad

2. Kedar Inamdar

411-415

PDF HTML

Study of Weld Joints Qualification as Per ASME Code: SCRF Cavity, A Case Study
Qualification of Niobium Weld Joints for SCRF Cavity

1. Bhushan Y. Dharmik

2. Syed Moulali

3. P. M. Khodke

4. A. M. Puntambekar

416-420

PDF HTML

Design and Development of New Mulching Machine for Agriculture
A novel approach to improving agricultural mulching machines

1. Padawal N. T.

2. Mali R. D.

3. Nandgavakar S. D.

4. Suryavanshi Vishwas Ramdas

5. Umesh P. Sutar

6. Duradundi Sawant Badkar

1-8

PDF HTML

Virtual Validation of Parabolic Leaf Spring under the Static Load Condition by using FEA
Enhancing Suspension System Performance through Virtual Validation

1. Sachin Patil

9-12

PDF HTML

Structural and Transient Thermal Analysis of Steam Turbine Rotor
Investigating Stresses and Temperature Distribution in a Steam Turbine Rotor

1. Nikhil S. Jumde

2. Vivek V. Pande

13-18

PDF HTML

Design and Development of Automated Capsicum Sorting System Using PLC
Improving Efficiency and Accuracy in Capsicum Sorting using Automation

1. Sujeet A. Soundattikar

2. Deepak R. Salunkhe

19-22

PDF HTML

Design of Crankshaft of Micro-alloy Steel by Using MATLAB for Fatigue Failure
Investigating the use of MATLAB for designing a micro-alloy steel crankshaft and analyzing its fatigue failure

1. Ranjeet Ghule

2. M. V. Kavade

3. G. S. Uppar

23-30

PDF HTML

Design and Development of an Attachment for a Drainage Cleaner
Enhancing Efficiency and Cost-effectiveness in Drainage Cleaning

1. Ashlesha Junghare

2. Rituja Kulkarni

3. Mrunal Dahake

31-34

PDF HTML

Gating System and Feeder Design of Aluminium Alloy (AA6063) Casting for Rectangular Component
Enhancing the Quality of Aluminium Alloy Casting through Optimal Gating System Design and Feeder Design

1. Kiran R. Jathar

2. Anant V. Hankare

3. Amol A. Sapkal

35-40

PDF HTML

Review of Selection of Tungsten Inert Gas Welding Parameters for Stainless Steel
Optimizing Welding Parameters for Stainless Steel using Tungsten Inert Gas Welding

1. Gajanan M. Koli

2. Vijay S. Jadhav

41-45

PDF HTML

Analysis of Heat Transfer Coefficient in Heat Pipe
Experimental study on heat transfer coefficient in a developed heat pipe

1. A. D. Awasare

2. R. N. Panchal

3. P. S. Jadhav

46-49

PDF HTML

Thermodynamic Analysis of Transcritical CO2 Refrigeration System Used For Simultaneous Heating and Cooling Application
Investigating the Performance of a Transcritical CO2 Refrigeration System for Simultaneous Heating and Cooling Application

1. S. D. Patil Shelake

2. Madhu L. Kasturi

3. S. H. Baber

50-54

PDF HTML

Effect of L/D Ratio on Thermal Performance of Ranque-Hilsch Vortex Tube
Experimental study on the influence of L/D ratio on the thermal performance of Ranque-Hilsch vortex tube

1. Kiran D. Devade

2. Ashok T. Pise

55-60

PDF HTML

Effect of Compression Ratio on Performance and Emissions of a Single Cylinder Four Stroke Diesel Engine
Impact of Compression Ratio on Performance and Emissions of a Single Cylinder Four Stroke Diesel Engine

1. Yogesh S. Awate

2. Madhu L. Kasturi

3. K. S. Gharge

4. A. T. Pise

61-65

PDF HTML

Reduction in Cold Start Emissions by Using PCM Based Catalytic Converter
Enhancing the Efficiency of Catalytic Converters for Reducing Cold Start Emissions

1. V. A. Chinchole

2. Prof. A. V. Waghmare

66-71

PDF HTML

Experimental Investigation of the Effect of Compression Ratio on the Performance of a VCR CNG Engine
Exploring the Impact of Compression Ratio on Performance and Environmental Sustainability of a VCR CNG Engine

1. Anand Ramachandran

2. Avinash Waghmare

72-77

PDF HTML

Thermal Performance of Phase Change Material and Water in Microchannel for CPU Processor Cooling
Enhancing CPU Processor Cooling with Phase Change Material

1. V. P. Gaikwad

2. S. P. More

78-83

PDF HTML

Experimental Investigation of Effects of Angle of inclination on Convective Heat Transfer through Permeable Fins in Natural Convection
Enhancing convective heat transfer through permeable fins

1. A. S. Pendse

2. S. U. Mayekar

3. S. A. Pashte

84-87

PDF HTML

Numerical Heat Transfer Analysis of Flowing Fluid through a Circular Tube with Helical Twisted Strip Inserts
Enhancing Heat Transfer in a Circular Pipe with Helical Strip Inserts

1. Sachin S. Surywanshi

2. Sanjay V. Kadam

3. Suhas S. Mohite

88-94

PDF HTML

Performance and Emission Improvement of Automobile Engine by Using Supercharging and Turbocharging: A Review
Enhancing Engine Performance and Emission Control using Supercharging and Turbocharging

1. Vaibhav D. Kshirsagar

2. Vaibhav D. Tarapure

3. Dhananjay Dolas

95-98

PDF HTML

Emphasizing Utilization of Solar Cooking Alternatives: Approach with an illustrative Case Study
A Case Study on Promoting Solar Cooking as an Alternative Fuel for Domestic Use in India

1. H. L. Deshpande

99-103

PDF HTML

Comprehensive Study on Additives to Reduce Ash Related Issues in Biomass Combustion
Analysis of Additives for Reducing Ash Related Issues in Biomass Combustion

1. Mohammed Junaid

2. N. V. Sali

104-107

PDF HTML

Review of Bubble Behaviour in Pool Boiling by Single Bubble Dynamics
Investigating bubble behavior and critical heat flux in pool boiling

1. Dinesh S. Kawale

2. A. R. Acharya

3. A. T. Pise

108-115

PDF HTML

Review of Waste Heat Recovery from Exhaust Gas of IC Engines
Exploring Efficient Methods for Waste Heat Recovery in IC Engines

1. Patil Amol S.

2. Gharge K. S.

3. Kawale Dinesh S.

116-120

PDF HTML

Review of Nanofluid as Coolant in Automobile Radiator
Experimental Analysis and Optimization of Nanofluid Coolant in Automobile Radiators

1. A. V. Mane

2. N. V. Sali

121-126

PDF HTML

Review of Heat Transfer Augmentation in a Tube Heat Exchanger Using Passive Methods
Enhancing Heat Exchanger Efficiency with Passive Methods

1. M. L. Kasturi

2. Junaid Mohammed

3. A. R. Acharya

127-131

PDF HTML

Review on Numerical Simulations of Heat Transfer of Single Bubble in Nucleate Pool Boiling
Advancements in Numerical Simulations for Heat Transfer in Nucleate Pool Boiling

1. S. B. Khule

2. A. R. Acharya

3. A. T. Pise

132-138

PDF HTML

Experimental and Numerical Investigation of Conventional Micro-Channel for Electronic Cooling
Comparison of Experimental and Numerical Results for Micro-Channel Cooling

1. Abhinandan Kumar

2. S. S. Mohite

3. V. P. Gaikawad

139-145

PDF HTML

Analysis of Plate Type Offset Fin Compact Heat Exchanger – A Review
Optimizing OSF Geometries and Design of Plate-Fin Heat Exchangers

1. Rishabh Melwanki

2. S. S. Umale

146-151

PDF HTML

Investigation of Heat Transfer Enhancement in Air Cooled Computer Processor Heat Sink
Investigation of Heat Transfer Enhancement in Air Cooled Computer Processor Heat Sink

1. A. S. Dabhole

2. S. M. Pise

3. P. B. Mutalik

152-157

PDF HTML

Experimental Investigation of Convective Heat Transfer by Permeable Fins at Different Angles of Inclination and Reynolds Numbers in Forced Convection
Impact of Permeable Fins on Convective Heat Transfer

1. K. N. Rege

2. S. U. Mayekar

3. V. S. Bagade

158-162

PDF HTML

Effect of Electrolyte Solution on Various Parameters in ECDM
Impact of Electrolyte Solutions on Machining Performance in ECDM

1. S. J. Mulani

2. A. D. Awasare

3. R. N. Panchal

163-167

PDF HTML

Process Parameter analysis of Plasma ARC Cutting for Surface Roughness and Material Removal Rate with the Help of Analysis of Variance Technique
Experimental Analysis of Plasma ARC Cutting Process Parameters

1. Ashish P. Mahajan

2. Digvijay Patil

3. N. H. Deshpande

168-174

PDF HTML

Process Optimization for Milling Operation - A Review
Optimizing Milling Process Parameters for Improved Dimensional Accuracy and Surface Quality

1. A. B. Jamdar

2. S. S. Patil

175-180

PDF HTML

Comparative Study of Mechanical Properties of Different Adhesives on Timber Bamboo
Investigating the Mechanical Properties of Adhesives on Timber Bamboo

1. Shubhangi M. Gondane

2. P. N. Belkhode

3. Manisha Joshi

181-185

PDF HTML

Development of Honeycomb Sandwich Structure for Aeronautical Flooring Components
Properties, manufacturing, and analysis of honeycomb sandwich structure for aeronautical flooring components

1. S. B. Akiwate

2. V. D. Shinde

186-192

PDF HTML

Value Stream Mapping in Manufacturing Industry: A Review
Implementing Value Stream Mapping for Process Improvement and Customer Satisfaction in Manufacturing Industry

1. Deveshkumar S. Pandey

2. B. E. Narkhede

193-198

PDF HTML

Delamination Detection in Composite Sandwich Beam: Experimental Study
Investigating the Effects of Delamination on Modal Properties in Multilayered Sandwich Beams

1. Ranjeet A. Patil

2. M. V. Kavade

199-204

PDF HTML

Design and Manufacturing of Brazed Joint to Study the Effect of Varying Joint Clearance on Joint Quality
Investigating the Impact of Joint Clearance on Quality of Brazed Joints

1. A. Bose

2. P. M. Khodke

3. G. V. Kane

4. P. S. Mulik

205-208

PDF HTML

Effect of Heat Treatment Parameters and Alloying Elements on Microstructure of Austempered Ductile Iron – A Review
Investigating the Influence of Heat Treatment Parameters and Alloying Elements on the Microstructure and Properties of Austempered Ductile Iron

1. Sagar A. Patil

2. Sanket S. Vathare

209-214

PDF HTML

Articles